York Fitness Treadmill User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
24
25
A Still open HARDWARE BAG 2.
B Pull LEAD WIRE through RIGHT CONSOLE MAST. After pulling the lead wire through the
mast, the top of the CONSOLE CABLE should be located at the top of the mast. Detach and
discard the lead wire.
C With the RUNNING DECK in the raised position, attach the RIGHT CONSOLE MAST to the
BASE FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
A Disengage the DECK LOCK LATCH with your foot to lower the RUNNING DECK.
B Open HARDWARE BAG 3.
C Connect the CONSOLE CABLES, carefully tucking wires in masts to avoid damage.
D Gently place the CONSOLE on top of the CONSOLE MASTS. Attach the LEFT SIDE first using
2 BOLTS (D), 2 SPRING WASHERS (B) and 2 FLAT WASHERS (C).
E Attach the RIGHT SIDE of the CONSOLE using 2 BOLTS (D), 2 SPRING WASHERS (B) and
2 FLAT WASHERS (C).
ASSEMBLY TOOLS
ASSEMBLY STEP 3
HARDWARE BAG 2 CONTENTS :
ASSEMBLY TOOLS
ASSEMBLY STEP 4
HARDWARE BAG 3 CONTENTS :
BOLT (A)
25 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (C)
15 mm
Qty: 4
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
RIGHT CONSOLE MAST
CONSOLE CABLE
CONSOLE CABLE
LEAD WIRE
BASE FRAME
RUNNING DECK
NOTE: Be careful not to pinch any wires while assembling the right console mast.
NOTE: Be careful not to pinch any wires while assembling the mast.
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (C)
15 mm
Qty: 4
BOLT (D)
20 mm
Qty: 4
BOLTS (D)
CONSOLE MAST
CONSOLE CABLES
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
SPRING WASHERS (B)
FLAT WASHERS (C)
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments